In the context of ANOVA-like tests, it is common to report ANOVA-like effect sizes. Unlike standardized parameters, these effect sizes represent the amount of variance explained by each of the model’s terms, where each term can be represented by 1 or more parameters.
For example, in the following case, the parameters for the treatment term represent specific contrasts between the factor’s levels (treatment groups) - the difference between each level and the reference level (obk.long == 'control').
data(obk.long, package = "afex")
# modify the data slightly for the demonstration:
obk.long <- obk.long[1:240 %% 3 == 0, ]
obk.long$id <- seq_len(nrow(obk.long))
m <- lm(value ~ treatment, data = obk.long)
parameters::model_parameters(m)> Parameter | Coefficient | SE | 95% CI | t(77) | p
> ------------------------------------------------------------------
> (Intercept) | 4.28 | 0.36 | [3.56, 5.00] | 11.85 | < .001
> treatment [A] | 1.97 | 0.54 | [0.89, 3.05] | 3.64 | < .001
> treatment [B] | 2.09 | 0.47 | [1.15, 3.03] | 4.42 | < .001>
> Uncertainty intervals (equal-tailed) and p values (two-tailed) computed using a
> Wald t-distribution approximation.But we can also ask about the overall effect of treatment - how much of the variation in our dependent variable value can be predicted by (or explained by) the variation between the treatment groups. Such a question can be answered with an ANOVA test:
parameters::model_parameters(anova(m))> Parameter | Sum_Squares | df | Mean_Square | F | p
> -----------------------------------------------------------
> treatment | 72.23 | 2 | 36.11 | 11.08 | < .001
> Residuals | 250.96 | 77 | 3.26 | |
>
> Anova Table (Type 1 tests)As we can see, the variance in value (the sums-of-squares, or SS) has been split into pieces:
treatment.We can now ask what is the percent of the total variance in value that is associated with treatment. This measure is called Eta-squared (written as \(\eta^2\)):
\[ \eta^2 = \frac{SS_{effect}}{SS_{total}} = \frac{72.23}{72.23 + 250.96} = 0.22 \]
and can be accessed via the eta_squared() function:
library(effectsize)
eta_squared(m, partial = FALSE)> # Effect Size for ANOVA (Type I)
>
> Parameter | Eta2 | 95% CI
> -------------------------------
> treatment | 0.22 | [0.09, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).When we add more terms to our model, we can ask two different questions about the percent of variance explained by a predictor - how much variance is accounted by the predictor in total, and how much is accounted when controlling for any other predictors. The latter questions is answered by the partial-Eta squared (\(\eta^2_p\)), which is the percent of the partial variance (after accounting for other predictors in the model) associated with a term:
\[
\eta^2_p = \frac{SS_{effect}}{SS_{effect} + SS_{error}}
\] which can also be accessed via the eta_squared() function:
m <- lm(value ~ gender + phase + treatment, data = obk.long)
eta_squared(m, partial = FALSE)> # Effect Size for ANOVA (Type I)
>
> Parameter | Eta2 | 95% CI
> -----------------------------------
> gender | 0.03 | [0.00, 1.00]
> phase | 9.48e-03 | [0.00, 1.00]
> treatment | 0.25 | [0.11, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).eta_squared(m) # partial = TRUE by default> # Effect Size for ANOVA (Type I)
>
> Parameter | Eta2 (partial) | 95% CI
> -----------------------------------------
> gender | 0.04 | [0.00, 1.00]
> phase | 0.01 | [0.00, 1.00]
> treatment | 0.26 | [0.12, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).(phase is a repeated-measures variable, but for simplicity it is not modeled as such.)
In the calculation above, the SSs were computed sequentially - that is the SS for phase is computed after controlling for gender, and the SS for treatment is computed after controlling for both gender and phase. This method of sequential SS is called also type-I test. If this is what you want, that’s great - however in many fields (and other statistical programs) it is common to use “simultaneous” sums of squares (type-II or type-III tests), where each SS is computed controlling for all other predictors, regardless of order. This can be done with car::Anova(type = ...):
eta_squared(car::Anova(m, type = 2), partial = FALSE)> # Effect Size for ANOVA (Type II)
>
> Parameter | Eta2 | 95% CI
> -----------------------------------
> gender | 0.05 | [0.00, 1.00]
> phase | 9.22e-03 | [0.00, 1.00]
> treatment | 0.24 | [0.11, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).eta_squared(car::Anova(m, type = 3)) # partial = TRUE by default> # Effect Size for ANOVA (Type III)
>
> Parameter | Eta2 (partial) | 95% CI
> -----------------------------------------
> gender | 0.07 | [0.01, 1.00]
> phase | 0.01 | [0.00, 1.00]
> treatment | 0.26 | [0.12, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).\(\eta^2_p\) will always be larger than \(\eta^2\). The idea is to simulate the effect size in a design where only the term of interest was manipulated. This terminology assumes some causal relationship between the predictor and the outcome, which reflects the experimental world from which these analyses and measures hail; However, \(\eta^2_p\) can also simply be seen as a signal-to-noise- ratio, as it only uses the term’s SS and the error-term’s SS.[^in repeated-measure designs the term-specific residual-SS is used for the computation of the effect size].
(Note that in a one-way fixed-effect designs \(\eta^2 = \eta^2_p\).)
Type II and type III treat interaction differently. Without going into the weeds here, keep in mind that when using type III SS, it is important to center all of the predictors; for numeric variables this can be done by mean-centering the predictors; for factors this can be done by using orthogonal coding (such as contr.sum for effects-coding) for the dummy variables (and NOT treatment coding, which is the default in R). This unfortunately makes parameter interpretation harder, but only when this is does do the SSs associated with each lower-order term (or lower-order interaction) represent the SS of the main effect (with treatment coding they represent the SS of the simple effects).
# compare
m_interaction1 <- lm(value ~ treatment * gender, data = obk.long)
# to:
m_interaction2 <- lm(
value ~ treatment * gender,
data = obk.long,
contrasts = list(
treatment = "contr.sum",
gender = "contr.sum"
)
)
eta_squared(car::Anova(m_interaction1, type = 3))> Type 3 ANOVAs only give sensible and informative results when covariates are
> mean-centered and factors are coded with orthogonal contrasts (such as those
> produced by 'contr.sum', 'contr.poly', or 'contr.helmert', but *not* by the
> default 'contr.treatment').> # Effect Size for ANOVA (Type III)
>
> Parameter | Eta2 (partial) | 95% CI
> ------------------------------------------------
> treatment | 0.12 | [0.02, 1.00]
> gender | 9.11e-03 | [0.00, 1.00]
> treatment:gender | 0.20 | [0.07, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).eta_squared(car::Anova(m_interaction2, type = 3))> Type 3 ANOVAs only give sensible and informative results when covariates are
> mean-centered and factors are coded with orthogonal contrasts (such as those
> produced by 'contr.sum', 'contr.poly', or 'contr.helmert', but *not* by the
> default 'contr.treatment').> # Effect Size for ANOVA (Type III)
>
> Parameter | Eta2 (partial) | 95% CI
> ------------------------------------------------
> treatment | 0.27 | [0.13, 1.00]
> gender | 0.12 | [0.03, 1.00]
> treatment:gender | 0.20 | [0.07, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).If all of this type-III-effects-coding seems like a hassle, you can use the afex package, which takes care of all of this behind the scenes:
library(afex)
m_afex <- aov_car(value ~ treatment * gender + Error(id), data = obk.long)> Contrasts set to contr.sum for the following variables: treatment, gendereta_squared(m_afex)> # Effect Size for ANOVA (Type III)
>
> Parameter | Eta2 (partial) | 95% CI
> ------------------------------------------------
> treatment | 0.27 | [0.13, 1.00]
> gender | 0.12 | [0.03, 1.00]
> treatment:gender | 0.20 | [0.07, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).These effect sizes are unbiased estimators of the population’s \(\eta^2\):
omega_squared(m_afex)> # Effect Size for ANOVA (Type III)
>
> Parameter | Omega2 (partial) | 95% CI
> --------------------------------------------------
> treatment | 0.24 | [0.10, 1.00]
> gender | 0.10 | [0.02, 1.00]
> treatment:gender | 0.17 | [0.05, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).epsilon_squared(m_afex)> # Effect Size for ANOVA (Type III)
>
> Parameter | Epsilon2 (partial) | 95% CI
> ----------------------------------------------------
> treatment | 0.25 | [0.11, 1.00]
> gender | 0.11 | [0.02, 1.00]
> treatment:gender | 0.18 | [0.06, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).Both \(\omega^2\) and \(\epsilon^2\) (and their partial counterparts, \(\omega^2_p\) & \(\epsilon^2_p\)) are unbiased estimators of the population’s \(\eta^2\) (or \(\eta^2_p\), respectively), which is especially important is small samples. Though \(\omega^2\) is the more popular choice (Albers and Lakens 2018), \(\epsilon^2\) is analogous to adjusted-\(R^2\) (Allen 2017, 382), and has been found to be less biased (Carroll and Nordholm 1975).
Partial Eta squared aims at estimating the effect size in a design where only the term of interest was manipulated, assuming all other terms are have also manipulated. However, not all predictors are always manipulated - some can only be observed. For such cases, we can use generalized Eta squared (\(\eta^2_G\)), which like \(\eta^2_p\) estimating the effect size in a design where only the term of interest was manipulated, accounting for the fact that some terms cannot be manipulated (and so their variance would be present in such a design).
eta_squared(m_afex, generalized = "gender")> # Effect Size for ANOVA (Type III)
>
> Parameter | Eta2 (generalized) | 95% CI
> ----------------------------------------------------
> treatment | 0.21 | [0.08, 1.00]
> gender | 0.10 | [0.02, 1.00]
> treatment:gender | 0.18 | [0.06, 1.00]
>
> - Observed variables: gender
> - One-sided CIs: upper bound fixed at (1).\(\eta^2_G\) is useful in repeated-measures designs, as it can estimate what a within-subject effect size would have been had that predictor been manipulated between-subjects (Olejnik and Algina 2003).
Finally, we have the forgotten child - Cohen’s \(f\). Cohen’s \(f\) is a transformation of \(\eta^2_p\), and is the ratio between the term-SS and the error-SS.
\[\text{Cohen's} f_p = \sqrt{\frac{\eta^2_p}{1-\eta^2_p}} = \sqrt{\frac{SS_{effect}}{SS_{error}}}\]
It can take on values between zero, when the population means are all equal, and an indefinitely large number as the means are further and further apart. It is analogous to Cohen’s \(d\) when there are only two groups.
cohens_f(m_afex)> # Effect Size for ANOVA (Type III)
>
> Parameter | Cohen's f (partial) | 95% CI
> ---------------------------------------------------------
> treatment | 0.61 | [0.38, Inf]
> gender | 0.37 | [0.17, Inf]
> treatment:gender | 0.50 | [0.28, Inf]
>
> - One-sided CIs: upper bound fixed at (Inf).Until now we’ve discusses effect sizes in fixed-effect linear model and repeated-measures ANOVA’s - cases where the SSs are readily available, and so the various effect sized presented can easily be estimated. How ever this is not always the case.
For example, in linear mixed models (LMM/HLM/MLM), the estimation of all required SSs is not straightforward. However, we can still approximate these effect sizes (only their partial versions) based on the test-statistic approximation method (learn more in the Effect Size from Test Statistics vignette).
library(lmerTest)
fit_lmm <- lmer(Reaction ~ Days + (Days | Subject), sleepstudy)
anova(fit_lmm) # note the type-3 errors> Type III Analysis of Variance Table with Satterthwaite's method
> Sum Sq Mean Sq NumDF DenDF F value Pr(>F)
> Days 30031 30031 1 17 45.9 3.3e-06 ***
> ---
> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1F_to_eta2(45.8, df = 1, df_error = 17)> Eta2 (partial) | 95% CI
> -----------------------------
> 0.73 | [0.51, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).Or directly with `eta_squared() and co.:
eta_squared(fit_lmm)> # Effect Size for ANOVA (Type III)
>
> Parameter | Eta2 (partial) | 95% CI
> -----------------------------------------
> Days | 0.73 | [0.51, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).epsilon_squared(fit_lmm)> # Effect Size for ANOVA (Type III)
>
> Parameter | Epsilon2 (partial) | 95% CI
> ---------------------------------------------
> Days | 0.71 | [0.48, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).omega_squared(fit_lmm)> # Effect Size for ANOVA (Type III)
>
> Parameter | Omega2 (partial) | 95% CI
> -------------------------------------------
> Days | 0.70 | [0.47, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).Another case where SSs are not available is when use Bayesian models. effectsize has Bayesian solutions for Bayesian models, about which you can read in the Effect Sizes for Bayesian Models vignette.