Package ‘SunCalcMeeus’ implements Meeus’ accurate algorithms for the computation of the position of the sun, usable far into the past and future. It also implements the computation of local solar time, day length, night length and times of sunset and sunrise, based on accepted and arbitrary sun elevation angles for twilight. Atmospheric refraction makes the apparent sun elevation, as seen be an observer on Earth, slightly different to the true astronomical sun elevation. The apparent sun elevation differs from the true astronomical position because the solar light beam changes its direction when travelling through the atmosphere. At low sun elevations at high latitudes a rather small difference expressed as an elevation angle becomes important for the apparent sunrise and sunset times. The exact value is difficult to compute with high accuracy as it depends on the water content in the atmosphere. The correction applied here assumes a “normal” water vapour column. Thus even if estimates of the true sun angles based on Meeus’ algorithm are reported to be accurate to 0.001 degrees, the estimates of the apparent sun elevation can be in error by as much as 1 degree.
The ‘SunCalcMeeus’ package also implements Kasten and Young’s (1989) approximation formula for optical air mass (AM) as a function of the apparent sun elevation and Young’s (1994) follow-up approximate formula as a function of the true sun elevation. In the first case the correction for atmospheric refraction must be included in the computation of the apparent elevation angle, in the second case this correction is applied when computing AM.
Class tod_time is defined and used to store time-of-day
values based on time zones. Classes solar_time and
solar_date are defined and used to store local solar times
and dates, i.e., astronomical time coordinates.
The same algorithms from Meeus’ book are used in the NOAA Solar Calculator of the United States National Oceanic and Atmospheric Administration (NOAA), Global Monitoring Laboratory. The version of the algorithm implemented in ‘SunCalcMeeus’ is not the simplified one used in the worksheets available from NOAA but instead nearly identical to that used in the on line calculator and assumed to be accurate enough to be used confidently for times between years 1000 BC to 3000 AC and with decreased accuracy even outside this range.
The functions provided are vectorised, and the best performance per computed value is achieved when long vectors of instants in time are passed as arguments, as the equation of time is in this case computed only once for each geographic location.
This package is part of a suite of R packages for photobiological calculations described at the r4photobiology web site and in the vignette The R for Photobiology Suite.
The functions now in ‘SunCalcMeeus’ were previously included in package ‘photobiology’. As they are being used also in other contexts, they are now published separately in this R package to increase their visibility, and facilitate their use and maintenance.
Example of simple astronomical calculations for the sun.
library(SunCalcMeeus)
library(lubridate)
#>
#> Attaching package: 'lubridate'
#> The following objects are masked from 'package:base':
#>
#> date, intersect, setdiff, union
# using times
geocode <- data.frame(lon = 0, lat = 55)
date <- lubridate::today(tzone = "UTC")
sunrise_time(date, geocode = geocode)
#> [1] "2024-12-02 08:03:29 UTC"
dates <- ymd("2024-09-21") + months(0:11)
sunrise_time(dates, geocode = geocode)
#> [1] "2024-09-21 05:44:49 UTC" "2024-10-21 06:42:40 UTC"
#> [3] "2024-11-21 07:44:40 UTC" "2024-12-21 08:23:23 UTC"
#> [5] "2025-01-21 08:07:51 UTC" "2025-02-21 07:08:02 UTC"
#> [7] "2025-03-21 05:58:42 UTC" "2025-04-21 04:41:25 UTC"
#> [9] "2025-05-21 03:41:44 UTC" "2025-06-21 03:20:40 UTC"
#> [11] "2025-07-21 03:51:03 UTC" "2025-08-21 04:46:35 UTC"day_length(dates, geocode = geocode)
#> [1] 12.269699 10.061427 8.043433 7.164578 8.116912 10.184419 12.278813
#> [8] 14.574059 16.496325 17.373085 16.513666 14.549905times <- ymd_hms("2024-09-21 12:00:00") + minutes(seq(from = 0, to = 60, by = 10))
data.frame(time = times, elevation = sun_elevation(times, geocode = geocode))
#> time elevation
#> 1 2024-09-21 12:00:00 35.37991
#> 2 2024-09-21 12:10:00 35.28459
#> 3 2024-09-21 12:20:00 35.11304
#> 4 2024-09-21 12:30:00 34.86607
#> 5 2024-09-21 12:40:00 34.54482
#> 6 2024-09-21 12:50:00 34.15073
#> 7 2024-09-21 13:00:00 33.68555sun_angles(times, geocode = geocode)
#> # A tibble: 7 × 12
#> time tz solartime longitude latitude address azimuth
#> <dttm> <chr> <solar_tm> <dbl> <dbl> <chr> <dbl>
#> 1 2024-09-21 12:00:00 UTC 12:07:04 0 55 <NA> 182.
#> 2 2024-09-21 12:10:00 UTC 12:17:04 0 55 <NA> 185.
#> 3 2024-09-21 12:20:00 UTC 12:27:05 0 55 <NA> 188.
#> 4 2024-09-21 12:30:00 UTC 12:37:05 0 55 <NA> 191.
#> 5 2024-09-21 12:40:00 UTC 12:47:05 0 55 <NA> 194.
#> 6 2024-09-21 12:50:00 UTC 12:57:05 0 55 <NA> 197.
#> 7 2024-09-21 13:00:00 UTC 13:07:05 0 55 <NA> 200.
#> # ℹ 5 more variables: elevation <dbl>, declination <dbl>, eq.of.time <dbl>,
#> # hour.angle <dbl>, distance <dbl>Installation of the most recent stable version from CRAN:
# not yet in CRAN!
# install.packages("SunCalcMeeus")Installation of the current unstable version from R-Universe CRAN-like repository:
install.packages('SunCalcMeeus',
repos = c('https://aphalo.r-universe.dev',
'https://cloud.r-project.org'))Installation of the current unstable version from GitHub:
# install.packages("devtools")
devtools::install_github("aphalo/SunCalcMeeus")HTML documentation is available at (https://docs.r4photobiology.info/SunCalcMeeus/), including an User Guide.
News on updates to the different packages of the ‘r4photobiology’ suite are posted at (https://www.r4photobiology.info/).
Two articles introduce the basic ideas behind the design of the suite and describe its use: Aphalo P. J. (2015) (https://doi.org/10.19232/uv4pb.2015.1.14) and Aphalo P. J. (2016) (https://doi.org/10.19232/uv4pb.2016.1.15).
A book is under preparation, and the draft is currently available at (https://leanpub.com/r4photobiology/).
Pull requests, bug reports, and feature requests are welcome at (https://github.com/aphalo/SunCalcMeeus).
If you use this package to produce scientific or commercial publications, please cite according to:
citation("SunCalcMeeus")
#> To cite package ‘photobiologySunCalc’ in publications use:
#>
#> Aphalo, Pedro J. (2015) The r4photobiology suite. UV4Plants Bulletin,
#> 2015:1, 21-29. DOI:10.19232/uv4pb.2015.1.14
#>
#> A BibTeX entry for LaTeX users is
#>
#> @Article{,
#> author = {Pedro J. Aphalo},
#> title = {The r4photobiology suite},
#> journal = {UV4Plants Bulletin},
#> volume = {2015},
#> number = {1},
#> pages = {21-29},
#> year = {2015},
#> doi = {10.19232/uv4pb.2015.1.14},
#> }© 2012-2024 Pedro J. Aphalo (pedro.aphalo@helsinki.fi). Released under the GPL, version 2 or greater. This software carries no warranty of any kind.